Clean Combo V2 Handlebar/Stem Combination

Here comes the new version of the full carbon handlebar/stem combination from Clean.
Here are the differences compared to the previous version:

-The clamping area is more solid and higher (measured at 43mm without insert)
-The 0°, 2°, and 4° inserts are also higher and have a more generous slotting for a more secure clamping
-The clamping screws are located in large aluminum inserts.

Made from the finest UD carbon in one piece for unprecedented stiffness. This also eliminates the problem of handlebars slipping and the need for centering the handlebar.

Of course the area from steerer tube to stem is executed in a sloped style without the necessary to cut the steerer tube in a sloped way.
Two M6x32 steel bolts for the stem clamping sit in massive aluminium inserts.
The topcap sit flat and sunk. Most risks of injuries from edges and corners by the control unit have lapsed.

The Combo comes with three different inserts (0°, 2° and 4°) for the steerer tube, which allows a variaty of logical, geometric settings.

For the use of the combo, the fork steerer tube must be 42mm long.
(If it is longer, you will need to shorten it or use spacers).

Width: 720mm
Coulor: Matt black with chrom coloured logos
Weight: 416,1g + topcap and bolt 20,1g + insert 29,7g (=465,9g total weight)