Comas Rear Disc Freewheel Hub 116/120 mm

This is the new, revolutionary Comas rear hub with integrated freewheel!

The freewheel in the rear has the big advantage of:

-More clicks (increased directly adressing of pedalkicks)

-Minimized tendency to turn around the cranks by moving the bike to the front

-May less weight depending on setup

For use of this hub you need a steer front and rear sprocket with Shimano HG with interlock.
Fitting sprockets you will find here:
https://trial-world.com/en/sprockets/2538-crewkerz-splined-sprocket-7mm-12-13-14-15-16-17-18-22-tooth.html

This hub is constructed for use with 12mm thru-axles with a apacing of 116mm or 120mm (Clean K1/X3 frames)
The concret adjustment follows about the incuding spacers.

The hub consits of a freewheel with 6-Pawls in two groups on 54 teeths, which results in 108 clicks in the rear wheel.
With a standard gearing of a 20“ bike with  18:12 this will result in reel 162 clicks!
(The usual, professional freewheel provides 135 clicks. Your kick will therefore be much more directly!)

The hub has four sealed and maintanance free, changeable bearings and is made of finest 7075-T6 aluminium.

Part of supply beside the hub is a 5mm lockring with a width of 5mm made of 7075-T6 aluminium for the sprocket, aswell the two x 4mm spacers.

Dimensions:

Thru axle: 12mm (passend für Clean)
Spacing: 112mm + mitgelieferten 4mm Spacer für 116mm Einbaubreite
Spoke holes: 32
Disc mount: 6-bolt IS mount
Sprocket mount: Shimano HG standard (splined)
Colour: Black with white Comas logos
Weight: 289,8g + lockring 4,8g + spacer 5,8g