Crewkerz WAW WPP 26” Carbon Fork

Crewkerz is THE manufacturer for innovations in trials.

This is a tapered 26” fork in most modern UD-Carbon manufacturing.
For the UD carbon manufacturing the fibers are not entangled and arranged parallel and are located next to each other without cross connections. (By usual weaving the fibers were bend, what results in less tensile strength).
The fork has been tested by several Crewkerz Teamriders like Jack Carthy to guarantee most stiffness and stability.

With the latest generation it has succeeded to reduce the weight for significantly over 50g!
The Fork comes with an aluminium insert to support the steerer tube for extra strength.

For the bottom 1.5“ bearing is a 45° crown race integrated – you don't need a separate one.
This insert has a length of 120mm and features an integrated star nut. The threaded section starts 20mm before the end of the steerer tube.

This for is available with open dropouts or thru axle (9mm) and each with HS Brake 4-bolt mounts spaced at 90mm or PM disc mount.
(All versions uses an aluminium insert to insure permanent thread durability.
The dropouts have a space of 100mm.

Axle to Crown length: 405mm
Axle Offset: 35mm
Steerer tube length: 190mm
Weight:
546g (Thru Axle HS33)
516g (Vertical Dropouts HS33)