

Depending on the country/region, our gross prices may differ.
This is the complete pre-build Clean front wheel, like used on many kid bikes.
Of course this wheel can also be used with rim brakes.
The wheel consists of the well proved Clean 20“ rim (32-hole) in combination with the Clean X2 disc rear hub.
These wheels are professional build with three-cross pattern by Clean in spain.
Default use are 1,8mm (15G) Spokes and red aloy nipples.
-Spacing: 116mm
-Width: 32,0mm
-Disc mounting: 6-hole IS standard
-Spocket mount: 1,37" x 24 tpi thread
If you want to use snail cam chain tensioners, you should change the supplied 4mm spacers with spacers which are reduced by the measure of your snail cams.
-Colour: black anodized with red nipples
-Weight: 654,4g + 19,6g axle bolts and axle bolt washers
Security policy
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Clean Rear Wheel X2 20“ Disc
This is the complete pre-build Clean front wheel, like used on many kid bikes.
Of course this wheel can also be used with rim brakes.
The wheel consists of the well proved Clean 20“ rim (32-hole) in combination with the Clean X2 disc rear hub.
These wheels are professional build with three-cross pattern by Clean in spain.
Default use are 1,8mm (15G) Spokes and red aloy nipples.
-Spacing: 116mm
-Width: 32,0mm
-Disc mounting: 6-hole IS standard
-Spocket mount: 1,37" x 24 tpi thread
If you want to use snail cam chain tensioners, you should change the supplied 4mm spacers with spacers which are reduced by the measure of your snail cams.
-Colour: black anodized with red nipples
-Weight: 654,4g + 19,6g axle bolts and axle bolt washers
* Required fields
Review sent
Your review cannot be sent
This is the complete pre-build Clean front wheel, like used on many kid bikes.
Of course this wheel can also be used with rim brakes.
The wheel consists of the well proved Clean 20“ rim (32-hole) in combination with the Clean X2 disc rear hub.
These wheels are professional build with three-cross pattern by Clean in spain.
Default use are 1,8mm (15G) Spokes and red aloy nipples.
-Spacing: 116mm
-Width: 32,0mm
-Disc mounting: 6-hole IS standard
-Spocket mount: 1,37" x 24 tpi thread
If you want to use snail cam chain tensioners, you should change the supplied 4mm spacers with spacers which are reduced by the measure of your snail cams.
-Colour: black anodized with red nipples
-Weight: 654,4g + 19,6g axle bolts and axle bolt washers