Crewkerz WAW WPP 20” Carbon Fork
Crewkerz is THE manufacturer for innovations in trials.
This is a tapered 20” fork in most modern UD-Carbon manufacturing.
For the UD carbon manufacturing the fibers are not entangled and arranged parallel and are located next to each other without cross connections. (By usual weaving the fibers were bend, what results in less tensile strength).
The fork has been tested by several Crewkerz Teamriders like Raphael Pils to guarantee most stiffness and stability.
At last now also as 20” version!
For the bottom 1.5“ bearing is a 45° crown race integrated – you don't need a separate one.
This insert has a length of 120mm and features an integrated star nut. The threaded section starts 20mm before the end of the steerer tube.
This for is available with open dropouts or thru axle (9mm) and each with HS Brake 4-bolt mounts spaced at 90mm or PM disc mount.
(All versions uses an aluminium insert to insure permanent thread durability.
The dropouts have a space of 100mm.
Axle to Crown length: 370mm
Axle Offset: 35mm
Steerer tube length: 190mm
516g (Thru Axle HS33)
502g (Thru Axle PM Discmount)
497g (Vertical Dropouts HS33)
510g (Vertical Dropouts PM Discmount)
Your review appreciation cannot be sent
Your report cannot be sent
Write your review
Your review cannot be sent