Crewkerz Jealousy Freewheel Rear Conversion-Kit

This is a complete kit to convert your Crewkerz Jealousy 20" bike to rear freewheel.

Charlie Rolls has been using it for a long time and more and more professional bikes are already equipped with rear freewheel from the factory.

The rear freewheel has some significant advantages:
- Increased number of engagement points (more direct response)
- Reduced rolling resistance (the cranks no longer have the tendency to move forward!)
- (Depending on setup, lighter weight)

This kit consists of:
- Hand-built wheel with the popular 19" rim from Hashtagg, the Hope Pro 5 freewheel hub, butted spokes, and aluminum nipples.
-18 tooth sprocket for the front
-10x spacers in different widths
-Lockring for freewheel hub

You can continue to use the 7mm wide sprocket from your standard wheel.

The supplied spacers must be arranged as follows:

Front:
The supplied 7mm wide, 18 tooth sprocket + two black 2.5mm spacers on each side of it..

Rear:
From inside to outside:
1mm spacer (black) 5mm spacer (silver)
7mm sprocket 12 teeth (not part of delivery)
3mm spacer (silver)
2mm spacer (black)
6mm spacer (silver with end cap)

Weight: 828,0g + 89,7g (sprocket, spacer, lock ring)