Clean K1 20“ Disc/HS33
Here comes the new Clean K1
2017 Clean released the first carbon trialbike.
There were many doubter, if carbon works as frame material in trials.
Today nobody has any more doubts, that carbon frames are also the future in trials.
It is well known, that carbon is much more lighter than aluminium, but also the stiffness and strength of carbon is unsurpassed.
The K1.2 comes with several improvements.
The prime concern are the thru axles.
Thus the wheel is not just clamped, for maximum stifness it's really screwed with the frame and fork.
(Through the dropout adaptors it's still possible to mount standard wheels with 10mm axles)
The rear sprocket is now a splined one (HG standard). Thus the replacing is very easy without need of a vise.
The new bashplate mountings has been moulded into the frame to ensure a perfect strength.
Here the most important features:
-Frame, fork and handlebar build of High Modulus Carbon
-Tapered Headtube (cone shaped): The bottom bearing has 1.5” to make this sensible are more stable and stiff.
-AS30 Crankset: The frame has a big bottom bracket shell with 46mm diameter with press fit bearings, so it is possible to use a 30mm axle. This crankset forms almost a unit with the frame. Every pedal impulse is transferred precisely to the bike. Further on the freewheel is interlocked, for easy change.
-Integrated chain tensioner: The requirement for vertical dropouts. The chain has always the perfect tension.
-Thru axles in front and rear for maximum stifness. The wheel is still sitting on the same spot.
We strictly recommend the use of the Clean K1 frame protectors!
BB height: +87mm
Frame: Clean K1 carbon
Fork: Clean carbon, tapered
Handlebar: Clean carbon,103mm total rise.
Grips: Clean foam, extra thin
Stem: Clean Pro 24° 155mm
Headset: Clean tapered, semiintegrated
Hubs: Clean Thru Axles
Brake Rear: Hope Trial Zone/Tech 3
BrakeFront: Clean HS33 complete NEW!
Rotor: Clean RS 162.5mm including disc protector
BB/Crankset: Clean 3-piece. 30mm axle, Pressfit, 160mm
Pedals: Clean Single Cage.
Chain: KMC X9L
Chain Tensioner: Clean integrated
Rim front: Clean V2
Rim rear: Clean T19
Nipples: Sapim 15g aluminium.
Freewheel: 135.9 clicks, 18 tooth, spline
Sprocket: Clean 12 tooth splined
Tyre front: Clean Koala 20”
Tyre rear: Clean Koala 19”
Tube front: Maxxis Ultralight
Tube rear: Maxxis Ultralight